The Receiver - Husqvarna HTC D80 Manuel De L'opérateur

HTC D80
4. Put in new battery (see Figure 6-6,
Figure 6-6. The battery placed in the transmitter
Figure 6-7. The battery in its correct position
5. Close the back piece
6. Tighten the 3 screws with a Philips screwdriver PH00 (torque 0.14 Nm).
7. After changing the battery, the light emitting diode will shine yellow for 1
second followed by 1 or 2 green flashes.
6.6.2

The receiver

The receiver has three different light emitting diode indicators that show information
about the system (see Figure 6-8, page 46).
The indications are as follows:
1.1
page 45 and Figure 6-7, page 45).
Service
45