Operating Elements; Charging Accumulators - Conrad AW-430 Notice D'emploi

Operating elements

Charging accumulators!

The headset is equipped with a rechargeable accumulator. Charge the accumulator for approx. 6 - 8
hours before using the headset for the first time! The headset will not function optimally if the accumula-
tor is not sufficiently charged.
Switch the headset off. To charge the accumulator, the jack bushing of the plug-in power unit has to be
inserted into the charging jack of the headset! (See illustration!) Then insert the plug-in power unit into a
mains socket (230V~/50Hz) of the public supply grid!
The green LED will light up briefly and then the red one permanently. You will also hear a beep tone. If
the accumulator is fully charged, the re LED will flash. You can now pull out the charging device from the
mains socket and the jack bushing from the charging jack!
If the red or green LED go out (after plugging in, the green LED flashes), the accumulator has to be
recharged!
14