Cleaning And Maintenance; Service; Disposal - AEG RX 3 Mode D'emploi

Caution!
after all measurements have been comple-
ted, remove liquids from the prism surface
[2] and prism cover [1] with an absorbent cloth .
then, thoroughly clean the prism and prism cover
with a damp cloth and wipe both parts with a soft,
dry cloth .
cleanInG anD
MaIntenance
clean the refractometer with a soft, damp cloth .
Do not use any aggressive and abrasive cleaning
products . the refractometer is maintenance-free .

servIce

should you have any questions regarding
commissioning or operating in spite of studying
these operating instructions, or if a problem should
occur against all expectations, please get in contact
with your specialist supplier .

DIsPOsal

the packaging is made from environmentally friend-
ly materials which can be disposed of at your local
recycle centre .
Images may slightly deviate from the actual product .
subject to change in the interest of technical ad-
vances . Decorations not included .
GB
19