Electronic Compass - Alcad 918 Serie Manuel D'utilisation

9.5.1 Electronic compass

This function returns the orientation of the satellite dish in comparison with the appliance.
The compass measurements are based on previous parameters : satellite to align, current latitude and
longitude.
Please, fill these parameters before using the electronic compass.
When triggering this key, the appliance calls for calibration of the (internal) compass.
To do so, you must turn the appliance in all directions until the message disappears.
The appliance displays your azimuth and if you have to turn to the left or to the right to face the satellite :
When the satellite is in front of you, the appliance displays your position on a green background like
here:
The « init.calibration » key relaunches the calibration of the compass.
45
or