Check Sat - Alcad 918 Serie Manuel D'utilisation

9 Check Sat

Only for satellite band.
The Check Sat mode allows you to quickly align the satellite dish by initial selection of the satellite.
Press and
Electrical
intensity of
LNB
The appliance has 32 possible orbital positions for satellites. It is provided with circa ten satellites
registered.
4 transponders are appended to each satellite.
You can select the satellite by pressing several times « Name and position of the satellite ».
To modify a transponder, you must press the corresponding key.
39
Frequency
Polarity
Symbol rate
Standard
Active or Inactive
Transponder
to access the Check Sat mode.
Name and position
of the satellite
Global
quality
indication
Frequency,
polarization,
band, level
and quality