SpringCard FunkyGate-IP PC/SC Guide De Démarrage Rapide page 7

7/12
9. Launch the application 'SpringCard NetPCSC Configuration'. You see your coupler with its new address in the
list of available readers. Click on start to launch NetPCSC Service
10. The list contains the readers already installed. The list at the end of the page contains is the list of the
readers detected by the network. (One click on Install allows you to install the device as a local PC/SC coupler, a
click on Unsinstall to uninstall the coupler).
Your reader is operational when you see "Ready" in the PC/SC column of your coupler.
For more information, please refer to this page
tech.springcard.com/2016/springcard-netpcsc-for-windows/
Installation on other operating systems
Using your FunkyGate IP PC/SC PC/SC Coupler under Apple MacOS X, Linux or other systems compliant with
UNIX is possible thanks to the open-source PCSC-Lite project (middleware and CCID driver).
A detailed procedure is provided at tech.springcard.com/guides/pcsc-unix-with-pcsclite/
NB: Should you have any question or experience any problem regarding the PCSC-Lite middleware or CCID
driver, please consider the blog and FAQ of the project's developers as your primary source for information.
Editing coupler's configuration
The behaviour of the FunkyGate IP PC/SC is highly configurable to address most requirements. Using
SpringCard MultiConf software (www.springcard.com/en/download/find/file/sn14007) is the preferred
method for changing the settings in the coupler.
PMU18296-AA