Bang & Olufsen Playmaker Mode D'emploi page 10

10
Your Playmaker must be set up
in a network either with a
wired or wireless connection.
To perform the setup, Playmaker
must be connected to the mains
supply and switched on.
Choose between the following
setup procedures:
– Bang & Olufsen Setup Utility
App for iOS devices*
– Easy wireless setup
– Wireless connection setup via
cable
– Wired connection
When Playmaker is set up in a
network, you can change
different settings using the
Bang & Olufsen Setup Utility
App or your computer. For
example, you can change the
name of your Playmaker on the
network or update its software.
For more information about
how to change settings, see the
Playmaker section on www.
bang-olufsen.com/faq.
*The Bang & Olufsen Setup Utility
1
App supports iOS devices only.
Scan the QR code on page 3 to
download the app.
Network setup
Bang & Olufsen Setup Utility
App
For iOS devices, use the Bang &
Olufsen Setup Utility App*
up your wireless network profile,
to change the product name or to
update software. You can also
enter the Playmaker setup page on
your computer.
First time setup ...
> Connect Playmaker to the mains
1
supply to switch on the product.
> The network indicator flashes
white for 1–2 minutes and then
flashes orange.*
> Find and connect to'Playmaker_
AP' on your wireless device.
> Open the Bang & Olufsen Setup
Utility App.
> The app will locate your product
in the network.
> Select your product and follow
on-screen instructions.
To make changes in the network
setup ...
> Your iOS device must be
connected to the same network
as Playmaker.
> Open the Bang & Olufsen Setup
Utility App.
> The app will find your product in
the network.
> Select your product and follow
on-screen instructions.
Easy wireless setup
> Press the
shortly.*
to set > Then press the wireless setup
1
button on your router.
The network indicator on your
Playmaker flashes green while
searching the network.*
Playmaker and the router are
connected, the network indicator
becomes solid white.
You can also access the wireless
setup via the web-based setup
page of your router and configure
2
from there.
*For overview of buttons, see
2
'How to operate your Playmaker'.
A previously well-functioning setup
may develop problems over time as
surroundings change. Check your
Ethernet connection or router. If
the problem persists, contact your
Bang & Olufsen retailer.
button on Playmaker
2
2 When