Stihl BG 56 Notice D'emploi page 16

English
Cranking
Place the unit on the ground.
N
Make sure you have a firm footing:
N
Hold the unit firmly with your right
hand on the housing and press
down.
Hold the starter grip with your left
N
hand.
Version with Easy2Start
Pull the starter grip steadily.
N
Version without Easy2Start
Pull the starter grip slowly until you
N
feel it engage and then give it a brisk
strong pull.
NOTICE
Do not pull out the starter rope all the
way – it might otherwise break.
14
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
As soon as the engine runs
Blip the throttle trigger (3) – the
N
choke knob moves to the run
position F – the engine returns to idle
speed.
BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
Stopping the Engine
BG 56, BG 66, SH 56
3
Move the stop switch to 0 – the
N
engine stops – the stop switch
springs back to the on position.
BG 86, SH 86
Move the setting lever to 0 – the
N
engine stops – the setting lever
springs back to the on position.
Other hints on starting
If the engine stops while the choke knob
in on g or during acceleration
Move the choke knob to < and
N
continue cranking until the engine
runs.