Automatic Mode; Zone Mode - RADSON 4 Zones RF Clock Guide D'utilisation

3.4

Automatic mode

In this mode all zones will follow the chosen program (Built-
in or customized) according to the actual time.
You can easily override, until next program step, the
current program mode. By pressing the (◄-) or (►+) keys
move the frame cursor on the desired zone, then press
(OK) and choose the override function with (►+).
The small hand
function is active.
The override will leave automatically when the program
changes to "
manually, press (i) and (OK).

Zone mode

3.5
Press (i) and (◄-) or (►+) to reach the Zone mode.
Zone
displayed
Program
of the day
When you enter in the Zone mode, the first operation is to
choose the zone number with (◄-) or (►+) keys.
Then press (OK) to choose now with (◄-) or (►+) the
program number. You have the choice between a built-in
program P1 to P9 and a user program U1 to U4.
If you chose a Built-in program P1 to P9,
(See the Annexe parts to view a complete description of
the Built-in program)
- Use the menu key (i) to change the program day
displayed.
- Press the (OK) key to confirm your choice and come back
to the main screen (in AUTO mode)
logo will be displayed when override
" or " " the next time. To stop the override
17
Current
day
Program
followed
by the
displayed
zone