Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
.
I
n
t
r
o
d
u
c
t
i
o
n
1
.
I
n
t
r
o
d
u
c
t
i
o
Fusion harness is ideal for paraglider pilot looking for several uses ( flight
mountain, cross, bivouac flight , tandem ) and wants to adapt for each
practice .
The harness Fusion is a modularconcept down into :
Fusion saddle (body) and four independent modules that can be used
separately. The modules are fixed on the body by a zipper. All modules fits
with all harness sizes .
It can be completed with a ventral rescue container, attached to the main
links of the harness.
No protection is a total warranty against injury. Only parts of the body covered by
protection may be protected without this protection being total.
For example, a back protector does not prevent injuries to the spine. The protection must
not be altered or damaged and the removable module must be present and properly
mounted.Protections are guaranteed for use at medium temperatures (-10 ° C to 35 ° C). The
lifetime of foam protectors is 5 years or limited to 3 consecutive shocks. For airbag, check
the correct positioning and the absence of holes or snags.
2
.
Y
o
u
r
h
a
r
n
e
s
2
.
Y
o
u
r
h
a
r
n
e
s
2.1 . Description, technicals data materials
The base element is the Fusion
body without modules.
This element was designed to
optimize the weight / comfort.
It can be used while sitting or lying
down with foot rest and also with
or without the carbon seatplate
It has many settings: thigh , ventral , depth, leaning and shoulders ,
all these settings are adjustable in flight.
It is equipped with a back pocket wide enough for a rucksack .
Accessories : Foot-rests Carbon Seat Plate
Available in 3 sizess : S , M L
S < 1 ,70 m approx, M < 1 ,80 m approxn, L
Weight 1 070 grs Foot-rests 1 30 grs Carbon Seat Plate 1 22g
Total weight 1 322 grs
n
s
s
>
1 .80m
Publicité
Table des Matières
