Mobile Application - Samsung Wisenet BabyView SEW-3055W Manuel D'utilisation

Mobile Application

1. Go to the Google Play or Apple App Store to install the "Wisenet BabyView App"onto
your mobile phone.
2. Turn camera on.
3. Press the "reset" button on the camera.
4. Click " " on your phone to search for the camera's Wi-Fi. Once you find it, press
the camera's Wi-Fi name to connect (picture 1).
5. Click the APP" ", then click "tap here to add device" (picture 2).
6. Scan the QR code found on the bottom of the camera or search, then enter in the
default password "000000", and click "OK" when finished (picture 3~5).
The monitor will show a "remote" icon on the screen when remotely connected to the
baby unit via "BabyView" App. Another way to remotely connect:
7. Search to see your camera and UID. You can reset the WLAN by clicking the "
icon (picture 6).
8. Press WLAN and select a local network, then input your local Wi-Fi Password (picture
7~11).
9. You can also press WLAN to connect the camera to your local router and change the
camera to Internet mode (picture12).
When you want to remotely connect 2 or more mobile phones with the camera, after
above steps, please set the other mobile phone(s) as below:
10. Click " " on phone and press WLAN which have connected with the camera
(picture 12).
11. Click the APP" ", then click "tap here to add device" (picture 2).
12. Scan the QR code found on the bottom of the camera or search, then enter in the
password, and click "OK" when finished (picture 3~5).
SEW-3055W-170117.indd 15
picture 1
"
picture 4
picture 7
picture 2 picture 3
picture 5 picture 6
picture 8 picture 9
English · 15
2017/1/17 14:40:27