Beuchat VS3 Notice D'utilisation page 49

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Notice Detendeurs 07-2008 int.qxd
valve. do not purge the regulator unless required.
6. If the regulator were to freeze up accidentally and the-
refore free flow, switch to your second breathing system
and abort the dive.
WARNING : Cold water diving requires special equip-
ment and training. Failure to follow the above instructions
and recommendations can result in serious injury or
death. Certified instruction should be received and com-
pleted for cold water and ice diving from a certified ins-
tructor by a recognized training agency prior to attemp-
ting any cold water or ice diving.
31/07/08
15:46
Page 47
VX 100 - VX 10 Iceberg / User guide
Note :
• The V10 first stage 3/8" LP ports can accommodate the
safe second stage octopus and the buoyancy compensa-
tor LP hose and / or drysuit inflator hose.
• On the 7/16" HP port, install a pressure gauge to check
air supply during the dive.
• A 3000/3300 psi DIN and 4400 psi DIN connection kit
can be installed on the V10 first stage by a BEUCHAT
authorized dealer.
• A 3000/3300 psi DIN to yoke adapter is available under
ref. #16740 to allow the mounting and the use of a DIN
regulator on a standard K-valve cylinder.
> 47

Publicité

Table des Matières
loading

Produits Connexes pour Beuchat VS3

Ce manuel est également adapté pour:

Vs3 octopusVs3 nitroxVrt 30Vrt 80Vx 100Vx 10 iceberg ... Afficher tout

Table des Matières