Transportation And Storage - THERMEx Trend 4500 Mode D'emploi

Symptom: No heat, indicator light off
Electric supply is off
No or low water flow
Water connections are reversed
Element burned out
Symptom: Water does not heat up, "E2" error displayed
Outlet water temperature sensor error
Symptom: Weak water heating
The user-set water temperature is very low or
the water flow is strong
Mentioned malfunctions are not defects and should be eliminated by the consumer or at his
expense.
If the water heater does not work properly, return it to the purchase place.
Transportation and storage of electric heaters is carried out in accordance with the handling
signs on the package:
Need to protect cargo from moisture
−
− Cargo fragility, condition of careful handling
− Recommended temperature range for cargo storage: from +10°С to +20°С
− Loading vertical position
10
TROUBLESHOOTING
Cause
Cause
Cause

TRANSPORTATION AND STORAGE

Remedy
Turn on the main circuit breaker.
Ensure that the minimum water pressure
(0.05 MPa) to switch on the device is met.
Also check that the inlet filter screen is clear
from any debris.
Cold water inlet = blue
Hot water outlet = red.
Call local dealer for maintenance
Remedy
Contact your authorized service center
Remedy
Set a higher outlet temperature or reduce the
water flow