Sleep Timer Operation; Dimmer Control - Salora CR618P Manuel D'instructions

EN
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When you press SNOOZE, the buzzer or radio
alarm sounds will stop and sound again after about 9 minutes.

SLEEP TIMER OPERATION

The sleep function is designed to automatically turn off the Radio.
Setting sleep timer
1. Press SLEEP.
 "90" will illuminate on the display.
2. Repeatedly press SLEEP to select the desired sleep time from 90, 80, 70,
60, 50, 40, 30, 20 or 10 minutes.
3. The radio will be turned off after the selected time has elapsed.
,
To check remaining sleep time
press SLEEP.
To cancel sleep timer,
press SLEEP until "OFF" is
selected.
To turn off the radio before the sleep time has elapsed,
press
POWER.
PROJECTOR
With this projection function, you can conveniently project the clock time onto
a surface e.g. walls.
 To turn on or off the projection, press PROJECTOR ON/OFF.
 To focus the projected time, rotate the projector wheel.
 To change the projection to a desired angle, rotate the projector.
NOTE:
If projection is illuminated, do not look directly into the projector.
The maximum projection distance is 2 metres.

DIMMER CONTROL

Repeatedly press DIMMER to adjust the brightness of display (bright or dim).
5