Maintenance Tips; Operating Tips; Safety Tips - Drive Medical super lite Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

maintenance tips

Proper care and maintenance is important in
order to keep your Super Lite Transport Chair in
good working condition. Be sure that your chair is
in proper working condition at all times. A
qualified dealer or repair center (wheelchair
rental dealer) should be consulted for periodic
inspections and repairs.
1.
At least once a week, wipe off the frame
using a clean and soft cloth. If the chair is
exposed to moisture, dry the chair
immediately. The metal parts of the chair
should be replaced promptly as it may not
support your body weight.
2.
Clean the upholstery with a mild soap
solution, rinse and wipe dry. Worn or torn
upholstery should be replaced promptly as it
may not support your body weight.
3.
Inspect the wheels at least once a month.
Correct any side play by loosening the lock
nut on the axle, then tighten the axle just
enough to remove side play.
4. Solid rubber tires require limited upkeep,
but need to be cleaned periodically with
a damp cloth. Solid rubber tires need to be
replaced if they become cracked or
severely worn.
It is important for the attendant to be familiar
with proper assisting procedures in any situation
that requires the use of the Super Lite Transport
Chair. Safety is the key consideration. Consult
your physician, nurse or physical therapist to
determine methods most suitable for your
individual needs and abilities.

operating tips

Your Transport Chair Dealer (Wheelchair rental
Dealer) can assist you in making adjustments and
provide with operational information.
1.
To open the chair, pull up on back support in
opposite direction of footrest.
2.
To fold down and store, stand behind chair,
pull release chair towards while pushing the
top of the back support away from you.
3.
To deploy footrest simply pull down the
footrest support. Pull the footrest support up
when not in use.

safety tips

1.
Before entering or leaving the chair, engage
the dual wheel locks against the tire on both
rear wheels. Make sure the front casters are
in the forward position before transferring
into or out of the chair.
2.
Do not move forward while leaning
forward in the chair.
3.
Leaning out of the transport chair without
proper assistance could cause tipping.
NOTE:
You and your attendant should
consult a qualified professional for the
correct techniques on ramp negotiations.

Publicité

Table des Matières
loading

Table des Matières