Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
31730XX1
32310XX1
Note:
To prevent shipping damage, the spout is attached to the
2.5 mm
spout escutcheon with two adhesive strips. Remove the
strips before installing the spout.
Loosen the spout screw with a 2.5 mm Allen wrench.Pull
the spout away from the escutcheon.
adhesive strips
Remove the adhesive strips.
Reassemble the spout assembly so that the hole for the
pull rod is at the rear of the spout.
3
Publicité
Table des Matières
