Care And Cleaning - Klarstein DRYFY PRO Instructions

• Air inlet and outlet and the distance between the adjacent material to keep 15 cm
above.
• After the machine is stopped, please restart in five minutes to make sure that the
machine is used for longer service life.
• if the long time does not use the desiccant, please unplug the power plug.
• If the machine inlet frosting, automatically defrost.

CARE AND CLEANING

• Do not put the body in the soft, uneven ground, in order to avoid vibration or sound.
• Do not use any fine rod, hard object into the body, so as to avoid failure or danger.
• Clean the body, gently wipe with a damp cloth, do not splash water, to avoid
damage to electrical insulation.
• Do not put heavy or water body above the vase, items.
• Please stay away from the fuselage. The heat source side heaters to avoid danger
and waste electricity.
• Please close the doors and windows when used to achieve the effect of the
desiccant.
• Please clean filter once every two weeks (not to use 40 degrees above the hot
water or alcohol, gasoline, toluene and other dangerous flammable liquid).
• After filtering the net, please do not dry in the sun, so as not to deformation.
• Around the body or out of the air outlet do not put items, to ensure that the effect of
the desiccant air.
• Power failure or long-term nouse, please unplug the power cable plug, so as to
avoid leakage, and fire.
• Before your moving the machine, pour out the water within the water tank.
• When not in use, please put in the position of ventilation, and unplug the power
plug to avoid danger.
EN
23