Klarstein SOFIA Mode D'emploi page 32

EN
32
Hook the hood body
• Open the panel.
• Remove the Metal grease filter using the handles provided.
• Hook the hood body to the bracket (20).
• Level the hood body itself.
Right
• From the inside of the hood body, fix the screws (10) to Wall Plugs at the points (3).
• Fit the filter into the hood.
• Close the panel.
Connections to ducted version air exhaust system
When installing the ducted version, connect the hood to the chimney using either a flexible
or rigid pipe 150 mm or 120 mm, the choice of which is left to the installer.
• If to install a 120 mm air exhaust connection, insert the reducer flange on the hood
body outlet.
• Fix the pipe in position using sufficient pipe clamps (not supplied).
• Remove possible charcoal filters.
Wrong