Hardware Installation - Belkin F8E815FRBNDL Guide D'utilisation

P74113qb_F8E815spBNDL_man.qxd 24-01-2003 13:50 Page 2
1. Be sure that your computer is turned off.
2. Connect the receiver to your computer. The receiver has a 2-head
connector for the keyboard and mouse connections (purple is for
the keyboard and green is for the mouse.) They also have pictures
on the top of the connector to identify them. Your computer
should either have the same color scheme or there will be a
picture next to the plug to identify it.
3. Install the batteries into your keyboard and mouse. Please make
sure you follow the picture on the inside compartment for the
batteries to make sure the batteries are installed correctly. Refer
to Fig. 1 and Fig. 2 below.
Battery Compartment
Fig. 1 Keyboard Bottom
Reset Button
Fig. 2 Mouse Bottom

Hardware Installation

2
Reset Button
Battery
Compartment