Setting The Date And Time - Olympus CAMEDIA C-5000ZOOM Manuel De Base

basic_e_x193_6.fm Page 14 Thursday, August 7, 2003 3:23 PM
4
Turn the power switch to the OFF position.
• The lens retracts, and the monitor and camera
turn off.
• If the camera is subjected to strong vibration or shock while turned
on, power may be interrupted, causing the date and other internal
Note
settings to revert to the factory default status.
SELECTING A LANGUAGE W
1
Set the mode dial to P and turn the camera on.
2
Press e.
• The top menu is displayed.
En
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac to select W, then press d.
6
Press ac to select a language, then press e.
7
Press e again to exit the menu.
8
To turn the power off, set the power switch to OFF.
SETTING THE DATE AND TIME X
1
Set the mode dial to P and turn the camera on.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac to select X, then press d.
• The green frame moves to the selected item.
14 En