Servicing And Cleaning; Disposal - VOLTCRAFT LSG-3 Mode D'emploi

Servicing and cleaning

Use a clean, lint-free, antistatic and dry cloth to clean the outside of
the device without abrasive or chemical agents or detergents con-
taining solvents.
Test tip of the net probe can be replaced with a new one if it is bad-
ly worn.
Proceed as follows for replacement
• Looking from the front, screw the tip in the anticlockwise direc-
tion out of the socket.
• Insert the enclosed replacement tip and screw the new tip firmly
up to the stop.
• The net probe is ready for use again.

Disposal

If the product is no longer functional and can no longer be repaired,
dispose of it in accordance with the relevant statutory regulations.
38