Resol HE-Check Manuel page 14

1/6 Measuring a PWM input signal
1/6
measured PWM signal in %
PWM 60%
IN 1000 Hz
measured PWM frequency in Hz*
* If the PWM signal measured is exactly 0 % or 100 %, no
PWM frequency can be measured. In this case, -- Hz
will be indicated.
2/6 Generating the PWM output signal
2/6
PWM 100%
generated PWM signal in %
OUT 1000 Hz
generated PWM frequency in Hz
Signal OFF
signal on / off
Î In order to adjust the duty cycle of the PWM signal,
select the desired value using buttons
adjusted value will be saved automatically.
Î Adjust the frequency of the PWM signal with the pa-
rameter PWM in the 6/6 menu.
Î In order to switch the signal on or off, press button
14
3/6 Measuring a 0-10 V input signal
3/6
0-10V
IN
4/6 Generating the 0-10 V output signal
4/6
0-10V
OUT
Signal
Î In order to adjust the duty cycle of the 0-10 V signal,
select the desired value using buttons
♉ ♊
and . The
adjusted value will be saved automatically.
The voltage of the 0-10 V signal generated automatically
adapts to the duty cycle value.
Î In order to switch the signal on or off, press button
♟
.
measured 0-10 V signal in %
26%
2,6V
measured voltage in V
0%
generated 0-10 V signal in %
0,0V
generated voltage in V
OFF
signal on / off
♉ ♊
and . The
♟
.