Cleaning; Removing And Fitting The Covers; Removing The Headrest Cover - Porsche Junior Seat ISOFIX Manuel D'utilisation

Masquer les pouces Voir aussi pour Junior Seat ISOFIX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87

Cleaning

d
Caution!
Risk of damage due to improper cleaning.
f Please observe the instructions on the cover's
laundry label. If the cover is washed at a
temperature higher than 30°C (86°F), the
cover fabric may bleed.
f Do not spin-dry the cover and never dry it in
an electric dryer (the fabric could separate
from the cushion).
You can remove the cover and machine-wash it
with mild detergent at 30°C (86°F) in the gentle
cycle.
You can clean the plastic parts, belts and
shoulder pads with a soap solution. Do not use
any aggressive agents (e.g. solvents).
68
Care Instructions

Removing and Fitting the Covers

The cover for the Porsche Junior Seat ISOFIX
consists of two parts. The Porsche Junior Seat
ISOFIX must be taken out of the vehicle in order to
remove the covers.

Removing the Headrest Cover

1. Tilt the headrest forward.
2. Remove the headrest cover (20).
3. Thread the headrest cover out of the belts.

Publicité

Table des Matières
loading

Table des Matières