First Use - Helite B'SAFE Manuel D'utilisation

FIRST USE

STEP 1: PAIR THE SADDLE SENSOR WITH THE VEST
Before using your B'Safe vest, it is necessary to pair (which means associate) the vest with the saddle sensor. To do so, you need the
vest, the saddle sensor and the magnet. Make sure the cartridge is connected to the vest.
3
seconds to effect this
• If you hear a LONG BEEP: the vest and the saddle sensor are paired.
• If you hear a SHORT BEEP: the vest and the saddle sensor have already been paired.
GOOD TO KNOW
 It is possible to pair several "saddle sensors" with one vest (5 maximum).
For example, if you have several bicycles, the pairing process has to be be done for each bike.
 It is possible to pair as many vests as you like with one saddle sensor.
 To check if your vest recognized the saddle sensor, you just need to place the magnet on the saddle sensor. A short "beep" on the
vest indicates that it recognized the sensor and that they are connected.
User Guide - Saddle Sensor
All manuals and user guides at all-guides.com
x3 1
Switch ON the vest
.
The LED flashes green and you hear a "beep".
2
Press the button
3 .
sec
go to the next step.
Place the magnet on the saddle sensor
.
procedure.
by pressing 3 times the button .
for 3 seconds until the LED turns blue.
over the round sign. Please note that you only have 30
18
Release the button and
19