Functions - Breville the All In One BSB530XL Livret D'instructions

Functions

BEFORE FIRST USE
Remove any packaging material and
promotional labels. Remove the blending
leg and wash it in warm soapy water (refer to
assembly instructions in this booklet). Rinse
and dry thoroughly.
Ensure no water remains inside the blending
leg to avoid water running into the motor body
when reattached. Disassemble and wash the
food processor bowl, bowl lid (ensure that the
removable gear box has been removed from
the lid prior to washing), whisk, S Blade™,
variable mashing leg and adjustable slicing
disc in warm soapy water, rinse and dry
thoroughly. Ensure no water remains on
the chopper bowl lid or whisk attachment to
avoid water running into the motor body
when reattached.
NOTE
The detachable blending leg, processing
bowl (without the gearbox), S Blade™, variable
mashing leg and whisk can also be washed in
the dishwasher (top shelf only). The whisk gear
box, processor gear box and motor body are
not dishwasher safe – see the care and cleaning
section of this booklet for cleaning instructions
of these parts.
This immersion blender is a versatile
appliance that can be attached to:
• The stainless steel blending leg – for use as
an immersion blender.
• The food processor bowl with S Blade™,
adjustable slicing disc, reversible shredding
disc - for use as a mini food processor.
• The variable mashing leg – for use in
mashing fruits and vegetables.
• The whisk attachment – for use as a
hand whisk.
BSB530XL_IB_C16.indd 9
TO ATTACH THE BLENDING LEG
Hold the blending leg with the blades down,
and align the top end of the blending leg with
the corresponding end of the motor body and
push until the blending leg clicks and locks
onto the motor body.
Always ensure blending leg is dry, and no
water left inside, before reattaching.
USING AS AN IMMERSION BLENDER
Ensure the blending leg is assembled to the
motor body as detailed above.
1. Place food to be processed into a jug (or a
sufficiently large mixing bowl or saucepan).
The jug should be only be ½ full or less
when blending liquids or when making a
puree of fruit and/or vegetables.
2. Insert the plug into a 110/120V power
outlet and turn the power on.
3. By turning the dial at the top of motor body,
select a speed from 1 to 15.
NOTE
If selecting a higher speed, it is recommended
that you start on a slow speed and then
increase to high speed to avoid splattering and
over-processing.
4. Place the blending leg as deeply as possible
into the jug and press the trigger switch
to turn the immersion blender on. The
button must be held for the required
duration of operation.
5. Work through the ingredients in the jug
with a gentle raising and lowering motion.
9
7/11/2016 1:45 PM