Care & Cleaning - Breville the All In One BSB530XL Livret D'instructions

Care & Cleaning
MOTOR BODY
To remove any food residue wipe the motor
body and cord with a damp cloth only.
Do not use abrasive cleaners or steel wool.
Never immerse the motor body in water or any
other liquid. Do not place motor body
in dishwasher.
BLENDING LEG
Before cleaning remove the plug from the
power outlet. Remove the motor body from
the stainless steel blending leg. The stainless
steel blending leg can be hand washed in hot
soapy water, rinsed and dried thoroughly after
each use. Alternatively, the blending leg can
also be washed in the dishwasher. (TOP SHELF
ONLY) Do not use abrasive cleaners or steel
wool.
QUICK WASH: Between each processing
task, with the motor body attached place the
stainless steel blending leg and blade assembly
only in to a jug of water and press the trigger
switch to turn on for 5 seconds.
This will remove any food on the blade and
leg and allow you to continue onto the next
processing task.
FOOD PROCESSING BOWL, FOOD
PROCESSING BOWL LID, S BLADE™,
ADJUSTABLE SLICING DISC &
REVERSIBLE SHREDDER
Before cleaning remove the plug from the
power outlet. Remove the motor body from the
food processing bowl lid and gear box. Remove
the food processing bowl lid and S Blade™ or
processing disc from the food processing bowl.
NOTE
The processing bowl lid is dishwasher safe.
Simply remove the removable gear box from
the lid prior to placing in the dishwasher.
18
BSB530XL_IB_C16.indd 18
The food processing bowl, bowl lid,
S Blade™ and processing discs should be
hand washed in hot soapy water, rinsed and
dried thoroughly after each use. Alternatively,
the food processing bowl, bowl lid, S Blade™,
adjustable slicing disc and reversible shredder
can also be washed in the dishwasher (TOP
SHELF ONLY). The S Blade™ comes with a
cover for your safety. This cover can be used
on the blade in the dishwasher. Do not use
abrasive cleaners or steel wool.
CARE & CLEANING OF THE GEARBOX
The gearbox should always be removed from
the lid prior to any cleaning.
The gearbox simply lifts out of the lid by
pulling it up.
NOTE
The gear box is not dishwasher safe and should
never be immersed in liquid at all.
To clean the gearbox, remove from the lid and
wipe down with a damp cloth only. Do not use
abrasive cleansers or steel wool.
VARIABLE MASHING LEG
Before cleaning remove the plug from the
power outlet. Remove the motor body and
mashing leg gearbox from the mashing leg.
The mashing leg can be hand washed in hot
soapy water, rinsed and dried thoroughly after
each use.
7/11/2016 1:45 PM