Care And Cleaning - DrinkMate 410 Manuel De L'utilisateur

CARE AND CLEANING

Rinse water bottle with clean
water after each use. Drinkmate
bottle bottom cap can also be
removed (by twisting) for
cleaning underneath it.
WARNING! Damaged water bottles can
fail during carbonation. Hand wash with
soap and warm water. Never place in
dishwater. Never use brushes, abrasives,
or chemical cleaners. Replace water
bottle if it is scratched, deformed, or
beyond expiration date.
To clean the carbonating unit,
wipe with a damp cloth. Do not
immerse unit in water. Do not
use any solvents or abrasive
cleaners, since this could
damage the surface.
TIPS FOR BEST RESULTS
• Use the coldest beverages possible, 33º-42ºF (0.5º-5.5ºC)
• Use this table as a reference guide to define how to
manipulate the push button for less foam and best results.
• Visit www.idrinkproducts.com for more tips and recipes.
Compatible
60L
(14.5oz/420g)
Drinkmate
CO2
Carbonator
Empty CO carbonators may be
exchanged for a full carbonator
at any participating Drinkmate
retailer for the cost of gas refill
only. Drinkmate accepts all
standard 60L cylinders on the
market.
Make sure to wash Fizz Infuser
after every use under running
water. The Fizz Infuser allows
you to carbonate non-water
based beverages because it can
both slowly relieve pressure and
can be easily cleaned. This is
especially important if foam came
out of the valve during use.
Press
Length Avg.
(seconds) Pushes
Water 1 2-3
Syrup .75 4-5
Juice 0.25-1 4-20
Wine 0.25-1 4-20