Error Messages; Messages D'erreur; Fehlermeldungen; Foutmeldingen - Epson STYLUS OFFICE BX600FX Serie Guide Des Operations De Base

Table des Matières

Publicité

Error Messages

Messages d'erreur

Fehlermeldungen

Foutmeldingen

& 76
R
EN
& 77
R
FR
& 78
R
DE
& 79
R
NL

EN
Error Messages
Paper jam. Open the scanner unit and remove the jammed
paper. Then close the scanner unit and press x. See your
documentation.
Paper is jammed in the printer. Turn off the printer,
open the scanner unit, and remove the paper. See your
documentation.
A printer error has occurred. Turn off the printer and turn it
on again. Please see your documentation.
A scanner error has occurred. See your documentation.
The printer's ink pads are nearing the end of their service
life. Contact Epson Support.
The printer's ink pads are at the end of their service life.
Please contact Epson Support.
The data is too complex to print with Bluetooth.
Error in the data. The document cannot be printed.
Error in the data. The document may not be printed
correctly.
Cannot recognize the device.
Cannot recognize the memory card or disk.
Backup Error.
Error Code xxxxxxxx
The combination of IP address and subnet mask is invalid.
See your documentation.
Solution
& 84
R
& 85
R
Turn the printer off and then back on. Make sure that no paper is still in
the printer. If the error message still appears, contact your dealer.
Turn the printer off and then back on. If the error message still appears,
contact your dealer.
Contact Epson support to replace ink pads before the end of their
service life. When the ink pads are saturated, the printer stops and
Epson support is required to continue printing.
Contact Epson support to replace ink pads.
See the documentation for the device transmitting the data.
See the documentation for the device transmitting the data. (Cause:
The data is not available because of a malfunction in the device.)
See the documentation for the device transmitting the data. (Cause: A
part of the data is corrupted or cannot be buffered.)
Make sure the storage disk has been inserted correctly.
Make sure the memory card or storage disk has been inserted correctly.
If so, check to see if there is a problem with the card or disk and try
again.
A problem occurred and backup was canceled. Make a note of the
error code and contact your dealer.
Refer the online User's Guide - Networking.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Stylus office tx600fw serieStylus office sx600fw serie

Table des Matières