Safety Instructions - Eurotops 47176 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

L 8100 / MG81000S
Warning: Please read this instruction manual carefully before using the instrument and keep it for future use.
A. SAFETY INSTRUCTIONS
1. The device is intended exclusively for private and not for commercial use. Only use this device as describe in this
instruction manual.
2. Do not use outdoors.
3. Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
4.
Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
5. This unit is not designed to be operated by means of an external timer or a separate remote control system.
6.
Never place the magnifying glass in the sun, this could trigger a fire by reverberation.
7.
Never look to the sun or to a lamp through the magnifying glass.
B. HOW TO USE IT
1) Insert or replace batteries
- Remove the battery cover on the back of the unit.
- Insert 3 AA batteries observing the correct polarity indicated.
- Replace the cover.
2) Disassembly and Installation of Lens
Two lens have different magnifications, 1.5x and 2.0x respectively. If only front lens (l .5x) requires to be used for viewing
general objects, back lens can be folded upwards. When tiny objects are viewed, use back lens (2.0x) and fold front lens
upwards. In time of insufficient magnification, two lens can be used to ensure 3.5x magnifying effect.
Two attached high-magnification lens can be installed to realize magnifying effect of higher
magnification.
Front lens adopts widening design. Using two lens can broaden visual range and make viewed objects
clearer and more complete.
Nevertheless, the lens can be removed, reducing weight, expanding vision, and increasing comfort
Hold right and left ends with fingers to pull lens out.
Auxiliary lens can be folded backwards to ensure good visual angle when it doesn't need to be used.
3 LED HELMET MAGNIFIER
EN

Publicité

Table des Matières
loading

Table des Matières