3com Wireless 8760 11a/b/g PoE Access Point Guide De Mise En Route page 4

3Com Wireless 8760 Access Point Features
1
6
7
Feature
1 Antenna
Connectors
2 LEDs
3 Ethernet Port
4 Serial Port
5 Reset Button
6 Kensington lock connector
7 Detachable rear-panel cover
8 Mounting Bracket
2
Description
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
The LEDs indicate power and activity. See "Checking the LED
Indicators" on page 8 for details.
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com switch. Use a suitable Category 5 cable with straight-through
signaling and standard RJ-45 connectors to connect your Access Point
to the switch on the network.
Provides a serial interface to the Access Point for diagnostic use.
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the
Access Point and holding for five seconds.
The mounting bracket comes attached to the Access Point and allows
the unit to be mounted on a wall or ceiling.
3 4
2
1
5
8