Table des Matières
Publicité
INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE
This Regency
product has been tested and listed by Intertek as a Direct Vent Room Heater to the following standards: CAN/CGA-2.17-M91,ANSI Z21.88-
®
2014 • CSA 2.33-2014.
This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home Construction
and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.
This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow the
current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA B149 Gas
Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.
This Regency
Mobile/Manufactured Home Listed
®
appliance comes factory equipped with a means
to secure the unit.
This Regency
appliance comes equipped with a dedicated #8
ground lug to which an 8 gauge copper wire from
the steel chassis ground must be attached.
Regency C34-10 Poêle au Gaz à Évacuation Directe CLASSIC™
Mobile/Manufactured Home listed
®
|
3
C34 Video
|
3
Publicité
Table des Matières
