Kübler 521 Mode D'emploi page 12

Operating instructions
Electronic display counter
CODIX 521, 522, 523
CODIX 521
Please note: Read first chapter 2 of CODIX 524
and go on at page 13
CODIX 522
Please note: Read first chapter 2 of CODIX 524
and go on at page 16
CODIX 523
Please note: Read first chapter 2 of CODIX 524
and go on at page 19
CODIX 524
1. Description
CODIX 524 is a multipurpose device. Depending on
the programmed basic function the device
operates like
• the adding counter and position indicator
CODIX 521 (page 13) or
• the frequency meter CODIX 522 (page 16) or
• the time meter CODIX 523 (page 19)
2. Setting of the operating
parameters
a. Hold down keys on front panel and switch on
supply voltage.
b. The display shows
c. After releasing the keys the display alternates
between menu title and corresponding menu
item with a frequency of 0.5 Hz. After any key is
pressed, only the menu item is displayed.
d. Pressing the right key, the menu item will be
switched to next value.
e. Hold down the left key and press the right key
to switch to the next menu title.
f. After programming the last menu item, the
programming routine will be left and the new
values will be stored by switching the menu
item to „YES". If you chose „NO", the
programming routine will be passed through
once again.
12
and
524
3. Programming routine
The first menu item is the basic function
Operating mode pulse
counter.
See programming routine
CODIX 521 (page 13)
Operating mode frequency
meter.
See programming routine
CODIX 522 (page 16)
Operating mode time
meter.
See programming routine
type CODIX 523 (page 19)