Proper Installation And Maintenance - GE UCG1500 Serie Manuel D'utilisation

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS
WARNING
SHOULD BE FOLLOWED, INCLUDING THE FOLLOWING:
must be properly installed and grounded in
accordance with the Installation Instructions before it
is used.
Do not operate with a damaged cord set, plug, motor,
or after damage in any manner. Have the appliance
examined, repaired, or adjusted by an authorized
service technician.
Do not take apart this appliance. Incorrect
reassembly can cause electric shock when
subsequently used.
NOTE: We strongly recommend that any servicing be
performed by a qualified person.
Do not use an adapter plug or an extension cord with
this appliance.
appliance must have a fused electrical supply of
120V, 60Hz, AC only, properly grounded 15 or 20
amp circuit.
If the electric supply provided does not meet the
above requirements, call a licensed electrician.
WARNING

PROPER INSTALLATION AND MAINTENANCE

used. If you did not receive an Installation Instructions with your compactor, you can receive one by visiting our
Website at GEAppliances.com. In Canada, visit www.GEAppliances.ca.
READ AND SAVE THESE INSTRUCTIONS
4
We recommend that a separate circuit serving only
this appliance be provided.
Do not, under any circumstances, cut or remove the
third grounding prong from the power cord.
a malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for electric current.
equipment grounding conductor and a grounding
outlet that is properly installed and grounded in
accordance with local codes and ordinances.
Improper connection of the equipment grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician if you are in doubt
as to whether the appliance is properly grounded.
Do not modify the plug with this appliance. If it
will not fit the outlet installed, have a proper outlet
installed by a qualified electrician.
49-55111-1