English - jbc Advanced Serie Mode D'emploi

We appreciate the trust you have shown in JBC by purchasing this equipment. It has
been manufactured with the highest standards of quality in order to give the best
possible service. Before using this apparatus, we recommend you read these
instructions carefully.
Cable connector to check the sleep
temperature Ref. 0780476
The TI 2800 thermometer is supplied with:
- Thermometer
- Sensor
- C a b l e c o n n e c t o r t o c h e c k t h e s l e e p
temperature
- Instructions manual
- Transport packaging.
Technical specifications
· Temperature range: 20 - 500°C (68°-920°F)
· Type of thermocouple:
· Ambient temperature correction: Fixed at 20°C
(68°F)
· Display resolution:
· Dimension
· Weight:
Caution
- Do not measure more than 0 - 500°C (40°-
920°F) soldering iron.
- Do not push iron tip strongly onto the sensor
when measuring.
Display
Ref. 2800010
Ref. 0780476
Ref. 0780917
E (NiCr-CuNi)
10°C (20°F)
Width : 160 mm
Height: 45mm
Deepth: 80 mm
0.9 Kg
1
TI 2800
Thermometer for soldering irons
Ref. 2800000
Screw adjustment at
ambient temperature
Unit maintenance
- Clean the sensor periodically removing old
solder flux residues.
How to use
Checking the working temperature of the
soldering iron:
1. The soldering tip must be well tinned.
2. Apply solder in the center of sensor.
3. Wait a moment until the reading temperature
becomes stabilized.
4. Read the temperature.

ENGLISH

Sensor
Ref. 2800010