Description Of Controls - Milnor E-P Plus Manuel D'utilisation

Description of Controls—

E-P Plus, M-Style Washer-Extractor
a
Operator Signal
This signal is activated when operator attention is required, as when unloading is required
or certain errors occur. Pressing A cancels the signal.
A
Signal Cancel button
This button extinguishes the operator signal (a). If the signal was programmed as part
of a formula, the formula resumes after this button is pressed. If an error caused a to
illuminate, pressing A after correcting the error will extinguish the signal. If a was
illuminated when a valid formula was selected, the signal will terminate automatically
when the formula is started or the door is opened.
R/P
Run/Program keyswitch
Setting the keyswitch to R prevents programmed data from being changed and allows
normal machine operation. Setting the keyswitch to P allows programming machine
operation and certain troubleshooting procedures.
1
Start button
This button starts a cycle or resumes an interrupted cycle if a formula is selected and
certain safety considerations are met.
2
MSOUJMCTAE/9433AV