FONESTAR FO-471-TX Mode D'emploi page 3

CONNECTION AND OPERATING
DIRECT CONNECTION WITH CAT 5e/6 CABLE
Cable Cat. 5e/6 - Pinout IEEE-568B
PIN COLOUR
1 Orange-white
2 Orange
3 Green-white
4 Blue
5 Blue-white
6 Green
7 Brown-white
8 Brown
- Connect the digital A/V source to the transmitter INPUT using HDMI cable.
- Connect the receiver OUTPUT to the TV monitor using HDMI cable.
- Use Cat 5e/6 100 or 120 meter cable respectively to connect the transmitter and the receiver according
to the IEEE-568B standard.
- Power the transmitter and the receiver with the mains adapters provided.
- Switch on the digital A/V source and the TV monitor.
CONNECTION VIA ETHERNET WITH SWITCH
- Connect the digital A/V source to the transmitter INPUT using HDMI cable.
- Connect the receiver OUTPUT to the TV monitor using HDMI cable.
- Connect the transmitter output to the switch input using Cat 5e/6 cable.
- Use Cat 5e/6 100 or 120 meter cable respectively to connect the switch and the receiver according to the
IEEE-568B standard.
- Power the transmitter and the receiver with the mains adapters provided.
- Switch on the digital A/V source and the TV monitor.
- 3 -
EN