FONESTAR FO-471-TX Mode D'emploi page 2

EN
DESCRIPTION
THIS MANUAL CORRESPONDS TO THE FOLLOWING MODELS:
FO-471-TX
HDMI Extension Transmitter by Cat 5e/6 cable.
Transmission distance up to 120 m with direct connection via a Cat 6 cable for 1080p resolution.
Expandable 120 m with each switch level.
Remote control extension function for source control from receiver location.
FO-472-RX
Receiver HDMI extension by Cat 5e/6 cable.
CONTROLS AND FUNCTIONS
TRANSMITTER (mod. FO-471-TX)
1.- Power supply input for the mains adapter provided.
POWER: LED power indicator. It lights up in blue when the transmitter is connected to the power supply.
2.-
CAT. 5e/6: transmitter output, RJ-45 connector.
3.-
4.- LED transmission signal indicator. It flashes quickly in yellow when the connection is made between the
transmitter and the receiver.
5.- LED connection indicator between transmitter and receiver. It lights up in green when the transmitter
and the receiver are connected using Cat 5e/6 cable.
RESET: reset button. Press this button to restore the devices and be able to display the image correctly
6.-
again.
INPUT: digital A/V signal input, female HDMI connector.
7.-
IR OUT: remote control transmitter connection output.
8.-
RECEIVER (mods. FO-471-TX and FO-472-RX)
1.- Power supply input for the mains adapter provided.
POWER: LED power indicator. It lights up in blue when the transmitter is connected to the power supply.
2.-
CAT. 5e/6: receiver input, RJ-45 connector.
3.-
4.- LED signal transmission indicator. It flashes quickly in yellow when the connection is made between the
transmitter and the receiver.
5.- LED connection indicator between the transmitter and the receiver. It lights up in green when the
transmitter and the receiver are connected using Cat5e/6 cable.
RESET: reset button. Press this button to restore the devices and be able to display the image correctly
6.-
again.
OUTPUT: digital A/V output, female HDMI connector.
7.-
IR IN: remote control receiver connection input.
8.-
- 2 -