Conventions Used In This Manual; Precautions For Placement And Use; Beware Of Condensation; Cleaning The Unit - Tascam VS-R264 Mode D'emploi

Conventions used in this
manual
In this manual, we use the following conventions:
p SD/SDHC memory cards are called" SD cards".
p "USB flash drives" are sometimes called "USB drives".
p As necessary, additional information is provided under
TIP, NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe
special cases.
ATTENTION
Failure to follow these instructions could result in
damage to equipment or lost data, for example.
V CAUTION
Failure to follow these instructions could result in
injury.
Precautions for placement and
use
p The operating temperature range of this unit is 0–40 °C.
p Do not install this unit in the following types of
locations. Doing so could make the sound quality
worse or cause malfunction.
Places with significant vibrations
Next to a window or in another location exposed to
direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
p To enable good heat dissipation, do not place anything
on top of the unit.
p Do not place this unit on top of a power amplifier or
other device that generates heat.
p When installing this unit on or under a desk, use the
included attachment brackets.
p To mount this unit in a rack, use a TASCAM AKRS1 (sold
separately).

Beware of condensation

Condensation could occur if the unit is moved from a
cold place to a warm place, it is used immediately after a
cold room has been heated or it is otherwise exposed to a
sudden temperature change.
To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using it.
6
TASCAM VS-R264 / VS-R265

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe
with chemical cleaning cloths, thinner, alcohol or other
chemical agents. Doing so could damage the surface or
cause discoloration.

Using the TEAC Global Site

You can download updates for this unit from the TEAC
Global Site:
http://teac-global.com/
In the TASCAM Downloads section, select the desired
language to open the Downloads website page for that
language.

Product registration

Customers in the USA, please visit the following TASCAM
website to register your TASCAM product online.
https://tascam.com/us/
About TASCAM customer
support service
TASCAM products are supported and warrantied only in
their country/region of purchase.
To receive support after purchase, on the TASCAM
Distributors list page of the TEAC Global Site (http:// teac-
global.
com/), search for the local company or representative for
the region where you purchased the product and contact
that organization.
When making inquiries, the address (URL) of the shop or
web shop where it was purchased and the purchase date
are required.
Moreover, the warranty card and proof of purchase might
also be necessary.

System requirements

Check the TEAC Global Site (http://teac-global.com/)
for the latest information about supported operating
systems.

Supported web browser

Google Chrome version 39 or newer