Zephyr Siena ZSI-E30CS Guide D'utilisation, D'entretien Et D'installation page 20

Features & Controls
ICON Touch Controls
3 LIGHTS BUTTON
- Lights have two levels, Low and High.
- From o , press one time for Low. Press again for High. Press again to power lights
o .
4 DISPLAY INDICATORS
Mesh Filter Clean Reminder (always enabled)
- After 30 hours of fan usage, the
indicating it is time to clean the mesh filters.
- To reset: With hood o : hold the
will blink two times confirming the 30 hour timer has been reset.
Charcoal Filter Replace Indicator (disabled by default, must be enabled if
recirculating hood)
- To enable Charcoal Filter Replacement Reminder:
- With hood o , hold
seconds. All LED indicators will illuminate for three seconds confirming the
Charcoal Filter Replace Reminder is enabled.
- To disable Charcoal Filter Replacement Reminder:
- With hood o , hold
seconds. All LED indicators will blink two times confirming the Charcoal Filter
Replace Reminder is disabled.
- After 120 hours of fan usage the
coal filters need replacment.
- To reset: With hood o , hold the
blink two times confirming the 120 hour timer has been reset.
20
button indicator will begin to slowly blink
button for three seconds. All LED indicators
button and button simultaneously for two
button and button simultaneously for two
button will slowly blink indicating the char
button for two seconds. All LED indicators will
Siena Use, Care, and Installation Guide
C O R E
S I E N A
WA L L