Maintenance And Cleaning; Warranty And Service Information; Warranty Conditions - Parkside PDST 10 A2 Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Unwinding the hose
Carefully extend the air hose
the drum housing to the desired working
length for the pneumatic tool. The latch
will engage if you release the com-
pressed air hose
a click.
Winding up the hose
1. Briefly pulling the working hose
release the latch.
2. Ensure that the working hose
wound into the drum housing
controlled manner.
Setting the hose stopped
The position of the hose stopper
set; it interrupts winding up of the working
hose
at the desired length. You need a
5
Phillips-head screwdriver to adjust the hose
stopper
(not included in the scope of
4
delivery).
1. Release the attachment screws
the Phillips-head screwdriver (see fig. D).
2. Push the hose stopper
position along the working hose
3. Tighten the attachment screws
z Maintenance and cleaning
Note: The air hose reel must be
regularly serviced and overhauled
for proper function and for
compliance with the safety requirements.
Improper and wrong operation may cause
failures and damage to the device.
Never use any sharp and/or scraping
cleaning agents or solvents. They may
damage the plastic parts of the air hose
reel.
All manuals and user guides at all-guides.com
Operation / Warranty and service informationty
from
5
after you have heard
5
will
5
is re-
5
in a
1
can be
4
with
9
into the desired
4
.
5
again.
9
Make sure that no water can enter inside
the hose drum. Ensure that the housing
and the compressed air hose remains
dust- and dirt-free. For this, regularly rub
the hose drum with a clean cloth.
Before you return the compressed
air hose into the housing, clean the
compressed air hose for further use if
possible.
Clean the hose drum and hose at regular
intervals using a moist cloth and a little
liquid soap.
z Warranty and service
information
Warranty from Creative Marketing &
Consulting GmbH
Dear Customer,
The warranty for this device is 3 years from
the date of purchase. In the event of product
defects, you have legal rights against the
retailer of this product. Your statutory rights
are not affected in any way by our warranty
conditions, which are described below.
z Warranty conditions
The warranty period begins on the date of
purchase. Please retain the original sales
receipt. This document is required as your
proof of purchase.
Should this product show any defect in mate-
rials or manufacture within 3 years from the
date of purchase, we will repair or replace it
– at our discretion – free of charge. To claim
against this warranty, you must present the
defective device and your purchase receipt
within the 3-year period, and include a brief
written description of the nature of the defect
and the date it occurred.
If the defect is covered by our warranty, we
will repair and return your product or send
GB/IE
23

Publicité

Table des Matières
loading

Table des Matières