Dimensions; Storage; Main Features - Franke ZA3OP0025 Notice De Montage Et De Mise En Service

Protection class:
IP:
Cooling:
Ambient temperature:
Storage temperature:
Derating:
Current carrying capacity with any
mounting position:
7.

Dimensions

8.

Storage

Permissible storage
temperature:
Permissible humidity:
In the case of long-term storage:
9.

Main features

• Wide-range AC input without changeover
• Switchable in parallel
• Contact-protected industrial device design according to VDE 0160
• Protection class 2 (in closed control cabinet)
• Protected by internal fuse on the primary side
• Protected by internal fuse on the secondary side
• Protected by electronic U-I control on the secondary side
• Mounting for TS35 support rail according to EN 50022
II in a closed switch cabinet
20
Natural convection
-25 °C to +55 °C
-25 °C to +85 °C
-3%/K > +45 °C
Max.1.6 A
-25 °C ... + 85 °C
30 ... 80% relative humidity; no condensation
must be present during commissioning.
Equipment with built-in capacitors must be
connected to the mains voltage for at least
5 minutes at least every 2 years.
- 6 -