Bimar AP09 Notice D'utilisation page 16

2.11 In the next screen, "Set Wi-Fi" (see below), type the PASSWORD of your Wi-Fi network and
click the "confirm" symbol to activate the connection. The countdown (see below) starts
and will be interrupted as soon as the smartphone has connected to the device.
2.12 The first screen reappears with the added option "UNIVERSAL REMOTE CONTROL" (see
right); click "DONE" to activate the device.
The device can also be shared with other users.
If the above operations do not proceed correctly, the device must be reset by disconnecting
the plug from the power socket and leaving the device disconnected for 30 seconds. Re-
connect the plug to the device's power socket, insert a small tool or a pin fully into the hole
(1) in the rear and press down for about five seconds; the light on the front will flash quickly.
Settings and customisations.
Open the smartphone screen and press
following functions:
Home management
-
Message centre
-
Assistance centre
-
Configure (audio, alerts, info, cache memory clear)
-
Press in the bottom centre to customise operation of the device to suit the various
scenarios or operating situations provided by the APP (for example: Back home, Leaving
home, Dawn, Goodnight, Temperature, Humidity, Weather, Air quality, Dawn/dusk) or in
combination with other devices.
in the bottom right corner to customise the