Bimar AP09 Notice D'utilisation page 15

2. To pair new devices with the smartphone
2.7 Fully insert the Type C connector of the charging cable into the socket in the rear and
insert the other type USB connector in the adapter (not included in the pack) and fit
the plug into the power socket. Insert a small tool or a pin fully into the hole (1) in the
rear and press down for about five seconds; the light on the front will flash quickly.
2.8 Open APP on the smartphone: in the first screen, click "ADD DEVICE" or click "
the top right corner.
2.9 In the next screen, click "
2.10 In the next screen, click"
quickly.
The device can also be
paired using the "AP Mode".
Insert a small tool or a pin
fully into the hole (1) in the
rear and press down for
about five seconds; the light
on the front
quickly. Access
smartphone WI-FI settings
and connect to the "Bimar
Live Smart xxx" or "Smart
Life xxx" network, then press
"connect now".
"/Universal remote control".
will flash
the
/Check that the LED flashes
" in