EnergyFlo Ultraboost H75 Notice D'utilisation page 5

Booster de démarrage
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
DIGITAL DISPLAY & INDICATORS
SPECIFICATIONS
Input: DC 12V 10A, DC 5V 2A - Storage temperature: 10°C to 25°C / Working temperature: -20°C to 40°C
Starting current
Recharge time from 12V battery
Recharge time from 12V socket
Recharge time from backup battery
Max consecutive starts
Start interval wait time
USB output (DC)
LIMITED WARRANTY
The warranty of this unit depends on the conditions granted by your retailer. The internal battery
warranty is subject to proper maintenance. The manufacturer shall have no liability whatsoever at any
time for any warranty, personal injury or property damages. Transport, wear and tear, misuse and abuse
are never included.
Using accessories not supplied or approved by the manufacturer will void the warranty and can be
dangerous.
Please dispose of the packaging in a responsible manner. It should be recycled by your local amenity or
placed in appropriate recycling bins. Never dispose of electrical equipment or batteries in your domestic
waste. Have them recycled by your retailer or your local amenity.
Vehicle's battery voltage
Ultracapacitor charge percentage
When ignition symbol appears, the unit is ready to start
Diesel Pre-Heat / GLOW mode activated
Internal battery charge level
Error: Reverse polarity
Error: Internal failure, do not use. Contact your distributor
H75
850 Amp
3-5 minutes
4-6 minutes
5-8 minutes
1-3
15 minutes
5V 2A
EN
04
H95
1000 Amp
4-7 minutes
5-8 minutes
6-10 minutes
2-5
20 minutes
5V 2A

Publicité

Table des Matières
loading

Produits Connexes pour EnergyFlo Ultraboost H75

Ce manuel est également adapté pour:

Ultraboost h95

Table des Matières