Jilong FUN JL097208N Mode D'emploi page 2

3. STORAGE AND MAINTAIN
1）It is necessary to carry out checks and maintenance of the main parts
(crossbeams, suspensions, anchors etc.) at regular intervals, if these checks
are not carried out the activity toy could overturn or otherwise become a hazard.
2）It is of particular importance to carry out the maintenance operations and
follow and respect the supplied recommandations at the beginning of each
season as well as at regular intervals during the usage season.
3) Clean the product with clear water, then leave it in shady and cool place for
airing, fold it into original package and place it indoor for next use.
Caution: Do not use the alkali or acid detergent to clean product! Do not
leave product exposed under sunlight directly because it will shorten the
using-life of product.
4. REPAIR PATCH INSTRUCTION (Small pinhole and small puncture leaks
can be repaired with the included repair patch)
a) Locate the leak place.
b) Deflate and drain the water.
c) Clean the area surrounding the leakage and wipe up all water from the
surface.
d) Take out the repair patch, cut it into required shape and size, which should
be litter larger than the leaking area, put the patch on leaking area and press
firmly.
e) You can use it again after 24 hours drying of the repaired position.
If the damage is bigger than 1" (2.5cm), we recommend using a Silicone or
rubber based glue for repair. Please read warning statement on glue prior to
use.
Shanghai Jilong Plastic Products Co. Ltd.
No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China
Tel: +86-21-58942200 E-mail: info@jilong.com Web: www.jilong.com
2