Nidec-Shimpo RK-3D Mode D'emploi page 5

Operation
1. Plug in fi rmly.
2. Turn on the power switch.
3. Turn FWD/REV switch in
re quired direction of rotation.
FWD - clock wise,
REV - counter clock wise.
4. Depress the speed
pedal so that the
wheel head will turn.
5. Press pedal forward
to increase speed or
back ward to decrease
speed. Press fully back
to stop the wheel.
6. Change direction of rotation
with the FWD/REV switch.
7. DO NOT change ro ta tion
direction while motor is
running. Do so only af ter
wheelhead has come to
a com plete stop.
8. At "0" rpm the wheelhead can be turned
freely for use as a banding wheel.
4,5,7
the speed pedal
3,6
FWD/REV switch
Adjust the stiffness
Pedal might get stiff or loose after long
year usage. In this case, please adjust
the stiffness by following procedures.
① Turn off the power and unplug the cord.
② Remove the legs and cover with the
provided wrench.
③ Adjust the stiffness of the pedal by
tightening the nut in the pedal shaft
with the provided wrench.
Fix the cover and legs after adjustment.
※ Do not touch the other parts.
It might cause defects.
4
2
power switch