Important Safety Precautions - Nidec-Shimpo RK-3D Mode D'emploi

Specifications
Model:
Motor:
Drive System:
Wheel head speed:
Speed control:
Wheel head direction:
Wheel head:
Dimensions:
Ship Weight:
Inspection/Standard Accessories
If upon delivery shipping damage is detected, do not operate the wheel. Notify the ship-
ping carrier immediately for damage claim instructions. Refer to product nameplate and
record serial number for future reference.
Items included with the RK-3D are:
●Two-piece splashpan.

Important Safety Precautions

This machine is built specifically for use as a potter's wheel. Use for purposes other
than pottery may put you at risk of danger or harm
●Do not use your wheel with any voltage other than that specified.
●Do not plug power cord into an extension cord (plug directly into an electrical wall outlet).
●Do not pull on the power cord to unplug;pull off at plug.
●Do not overload the wheelhead with more than the recommended weight of clay.
●Do not force the wheel to stop as this may damage your wheel.
●Set up the potter's wheel on a level surface. The top right foot is adjustable and will aid
you to level the wheel.
●Remove the metal cover only when adjusting the pedal stiffness. Refer all electrical repairs
to a qualified electrical technician.
After operating, before cleaning or inspection:
1. Turn ON/OFF switch to OFF
2. Unplug wheel from power source
RK-3D
400W AC230V. 50Hz Single-Phase
Direct drive DC brushless motor with electric speed control
0 ～ 250rpm
Fixed foot pedal with lever
clock wise/counter clock wise
Light alloy casting, diameter 300mm
525(width) ×582(Length) ×515(Height) ㎜
45kg
●T-wrench (for tightening wheelhead).
●Allen wrench for attaching foot pedal.
●Spanner for adjusting feet.
●plastic clip
●Instruction manual.
2
●Foot pedal with hand
lever and grip knob.