Safety Notes; Delivery Contents - Hella Gutmann mega macs 50 Notice D'utilisation

US Quick-start guide
8

Safety notes

> Connect only an original mains supply (supply voltage 12 V).
> Always take all connections with engine standing still.
> Check the cables of high-voltage components for damages (marten damage etc.).
> Protect the LC-/TFT display and the tool from longer-lasting solar radiation.
> Protect the tool and the connection cable from hot components.
> Protect the tool from rotating parts.
> Regularly check the connection cables/accessory parts for damage
(danger of tool destruction due to short circuit).
> Connect the tool only according to the user manual.
> Protect the tool from water (it is not waterproof).
> Protect the tool from strong impacts (do not drop).
> Only technicians authorised by Hella Gutmann are allowed to open the tool.
Warranty will expire if the protection seal is broken or in case of unauthorised opening of
the tool.
> Please inform Hella Gutmann immediately in case of tool troubles.

Delivery contents

1 mega macs 50
1 Mains supply and charging unit
1 ST2 cable with OBD connector
1 Test lead green/black
1 Test lead red/black
1 set of alligator clips, test prods, grip clamps (2 pieces each)
1 USB cable
1 air macs base
1 mega macs 50 user manual on DVD
Support
Hella Gutmann Solutions GmbH
Am Krebsbach 2
79241 Ihringen
GERMANY
T +49 7668 9900-0
F +49 7668 9900-3999
Mail info@hella-gutmann.com
Web www.hella-gutmann.com