Garden Treasures PG202H Mode D'emploi page 15

CARE AND MAINTENANCE
Cleaning
· Wipe surfaces clean with mild dish detergent or baking soda.
· For stubborn surfaces, use a citrus-based degreaser and a nylon scrubbing brush.
· Rinse clean with water.
Note: While cleaning the unit, be sure to keep the area around the burner dry at all times. Do not
submerge the control valve assembly. If the gas control is submerged in water, do NOT use it. It
must be replaced.
TIP: Use high-quality automobile wax to help maintain the appearance of the heater. Apply to
exterior surfaces from the pole down. Do not apply to emitter screen or domes
Maintenance
· Keep exterior surfaces clean.
· Air flow must be unobstructed. Keep controls, burner and circulating air passageways clean.
Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
Note
In a salt-air environment (such as near an ocean), corrosion occurs more quickly than normal.
Frequently check for corroded areas and repair them promptly.
Storage
Between uses or during periods of extended inactivity:
· Turn control knob to "OFF".
· Disconnect LP cylinder and move to a secure, well-location outdoors.
· Store heater upright in an area sheltered from direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
Note
Never leave LP gas tank exposed to direct sunlight or excessive heat.
· If desired, use cover(s) to protect the heater and help prevent buildup in air passages.
CAUTION
Wait until heater is cool before covering.
15