Assembly Instructions - Idylis I HUM 10 140 Mode D'emploi

ASSEMBLY INSTRUCTIONS

4. Ensure the chassis (A) with pivot lid (B) attached
opens smoothly. Set chassis aside while assembling
the rest of the humidifi er.
5. Lay cabinet (H) down on front or sides on a soft
surface (to avoid scratching fi nish). Insert one caster
(J) into each corner of the cabinet. Insert fully until the
stem shoulder meets the cabinet.
6. Turn cabinet (H) right side up. The fl oat (D) should stay
in place. If not, install the fl oat into the fl oor inset using
the fl oat retainer (C) as shown in illustration.
4
5
6
www. lowes.com
6